Wiper coating method for PEDOT:PSS film on fabricating organic photovoltaic modules

Jae Hyeong Lee; Won Suk Chung; Nam Gyu Park; Kyungkon Kim

doi:10.1016/j.cap.2010.08.028

Wiper coating method for PEDOT:PSS film on fabricating organic photovoltaic modules

Jae Hyeong Lee, Won Suk Chung, Nam Gyu Park, Kyungkon Kim

Department of Chemistry & Nanoscience

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

A simple wiper coating method was introduced to coat large area of PEDOT:PSS film for the polymer solar cell module. A thin and smooth film of PEDOT:PSS was prepared by the method. The efficiency of 4.46% was obtained from the single cell having wiper-coated PEDOT:PSS layer. The efficiency is comparable to the polymer single cell prepared by spin coating method. The atomic force microscopy result confirms that the surface of the film prepared by the coating method is smooth uniform. The large area module was prepared by the method and the V_OC of 5.30 V, I_SC of 19.88 mA and FF of 53.29% was obtained from the polymer solar cell module. The resulted power conversion efficiency was 1.21% with on aperture size 46.2 cm².

Original language	English
Pages (from-to)	e185-e188
Journal	Current Applied Physics
Volume	10
Issue number	4 SUPPL.
DOIs	https://doi.org/10.1016/j.cap.2010.08.028
State	Published - Nov 2010

Bibliographical note

Funding Information:
This research was supported by the New and Renewable Energy Program through the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Ministry of Knowledge Economy (MKE) ( 008NPV08J010000 ) and KIST internal research fund under the contract number of 2E20980 .

Keywords

Organic photovoltaics
Polymer solar cell
Polymer solar cell module

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.cap.2010.08.028

Cite this

@article{adf3c0bde8d8485ab1abbf377c41f69c,

title = "Wiper coating method for PEDOT:PSS film on fabricating organic photovoltaic modules",

abstract = "A simple wiper coating method was introduced to coat large area of PEDOT:PSS film for the polymer solar cell module. A thin and smooth film of PEDOT:PSS was prepared by the method. The efficiency of 4.46% was obtained from the single cell having wiper-coated PEDOT:PSS layer. The efficiency is comparable to the polymer single cell prepared by spin coating method. The atomic force microscopy result confirms that the surface of the film prepared by the coating method is smooth uniform. The large area module was prepared by the method and the VOC of 5.30 V, ISC of 19.88 mA and FF of 53.29% was obtained from the polymer solar cell module. The resulted power conversion efficiency was 1.21% with on aperture size 46.2 cm2.",

keywords = "Organic photovoltaics, Polymer solar cell, Polymer solar cell module",

author = "Lee, {Jae Hyeong} and Chung, {Won Suk} and Park, {Nam Gyu} and Kyungkon Kim",

note = "Funding Information: This research was supported by the New and Renewable Energy Program through the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Ministry of Knowledge Economy (MKE) ( 008NPV08J010000 ) and KIST internal research fund under the contract number of 2E20980 .",

year = "2010",

month = nov,

doi = "10.1016/j.cap.2010.08.028",

language = "English",

volume = "10",

pages = "e185--e188",

journal = "Current Applied Physics",

issn = "1567-1739",

publisher = "Elsevier B.V.",

number = "4 SUPPL.",

}

TY - JOUR

T1 - Wiper coating method for PEDOT:PSS film on fabricating organic photovoltaic modules

AU - Lee, Jae Hyeong

AU - Chung, Won Suk

AU - Park, Nam Gyu

AU - Kim, Kyungkon

N1 - Funding Information: This research was supported by the New and Renewable Energy Program through the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Ministry of Knowledge Economy (MKE) ( 008NPV08J010000 ) and KIST internal research fund under the contract number of 2E20980 .

PY - 2010/11

Y1 - 2010/11

N2 - A simple wiper coating method was introduced to coat large area of PEDOT:PSS film for the polymer solar cell module. A thin and smooth film of PEDOT:PSS was prepared by the method. The efficiency of 4.46% was obtained from the single cell having wiper-coated PEDOT:PSS layer. The efficiency is comparable to the polymer single cell prepared by spin coating method. The atomic force microscopy result confirms that the surface of the film prepared by the coating method is smooth uniform. The large area module was prepared by the method and the VOC of 5.30 V, ISC of 19.88 mA and FF of 53.29% was obtained from the polymer solar cell module. The resulted power conversion efficiency was 1.21% with on aperture size 46.2 cm2.

AB - A simple wiper coating method was introduced to coat large area of PEDOT:PSS film for the polymer solar cell module. A thin and smooth film of PEDOT:PSS was prepared by the method. The efficiency of 4.46% was obtained from the single cell having wiper-coated PEDOT:PSS layer. The efficiency is comparable to the polymer single cell prepared by spin coating method. The atomic force microscopy result confirms that the surface of the film prepared by the coating method is smooth uniform. The large area module was prepared by the method and the VOC of 5.30 V, ISC of 19.88 mA and FF of 53.29% was obtained from the polymer solar cell module. The resulted power conversion efficiency was 1.21% with on aperture size 46.2 cm2.

KW - Organic photovoltaics

KW - Polymer solar cell

KW - Polymer solar cell module

UR - http://www.scopus.com/inward/record.url?scp=78449289608&partnerID=8YFLogxK

U2 - 10.1016/j.cap.2010.08.028

DO - 10.1016/j.cap.2010.08.028

M3 - Article

AN - SCOPUS:78449289608

SN - 1567-1739

VL - 10

SP - e185-e188

JO - Current Applied Physics

JF - Current Applied Physics

IS - 4 SUPPL.

ER -

Wiper coating method for PEDOT:PSS film on fabricating organic photovoltaic modules

Abstract

Bibliographical note

Keywords

UN SDGs

Access to Document

Fingerprint

Cite this