Skip to main navigation Skip to search Skip to main content

Interface engineering of co-evaporated Sb2Se3 solar cells using an ALD SnOx interlayer

  • Van Quy Hoang
  • , Jaebaek Lee
  • , Geumha Lim
  • , Amanat Ali
  • , Bashiru Kadiri-English
  • , Dong Hwan Jeon
  • , Dae Ho Son
  • , Hyo Jeong Jo
  • , Dae Kue Hwang
  • , Kee Jeong Yang
  • , Eunkyung Cho
  • , Jin Kyu Kang
  • , William Jo
  • , Shi Joon Sung
  • , Dae Hwan Kim

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

To compensate for the limited efficiency of co-evaporated Sb2Se3 solar cells, effective physical and chemical passivation of the interface between the Sb2Se3 absorber and the CdS buffer layer was achieved through the deposition of an ultrathin SnOx interlayer via atomic layer deposition (ALD). Due to the passivation effect of the ALD SnOx interlayer, carrier recombination at both the intra-grain and grain-boundary regions was suppressed, and Sb interdiffusion from the Sb2Se3 absorber to the cadmium sulfide (CdS) buffer was effectively blocked. Additionally, the rough surface of the co-evaporated Sb2Se3 absorber was mitigated by the conformal deposition of the ALD SnOx interlayer, reducing the statistical variation in the photovoltaic parameters of the co-evaporated Sb2Se3 solar cells. The ultrathin ALD SnOx interlayer was demonstrated to be a practical strategy for enhancing Sb2Se3 solar cell performance regardless of the absorber's morphology, achieving a substrate-type Sb2Se3 solar cell with an efficiency of 7.395% through the co-evaporation process.

Original languageEnglish
Pages (from-to)990-1003
Number of pages14
JournalEES Solar
Volume1
Issue number6
DOIs
StatePublished - 1 Dec 2025

Bibliographical note

Publisher Copyright:
This journal is © The Royal Society of Chemistry, 2025.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Fingerprint

Dive into the research topics of 'Interface engineering of co-evaporated Sb2Se3 solar cells using an ALD SnOx interlayer'. Together they form a unique fingerprint.

Cite this